Siemens Junelight Smart Battery

The battery has to be set to Loxone with the installer account.

Usage areas

Grid meter
Solar production
Battery

Parameters

Name	Description	Value	Level
`id`	Modbus ID Default: `1`	int	required
`host`	IP address or hostname Example: `192.0.2.2`		required
`port`	Port Default: `502`	int	required
`capacity` [kWh]	Battery capacity Example: `50`		optional
`minsoc` [%]	Minimum charge Lower limit when discharging the battery in normal operation Example: `25`		optional
`maxsoc` [%]	Maximum charge Upper limit when charging the battery from the grid Example: `95`		optional
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.		advanced
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.		advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

Grid meter Solar production Battery

meters:
    - name: my_grid
      type: template
      template: siemens-junelight
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: siemens-junelight
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: siemens-junelight
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 25 # Minimum charge (%), Lower limit when discharging the battery in normal operation (optional)
      maxsoc: 95 # Maximum charge (%), Upper limit when charging the battery from the grid (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)