EcoFlow PowerOcean

To use the EcoFlow PowerOcean meter you need:

A valid Access Key from the EcoFlow Developer Console
The corresponding Secret Key
The serial number of your PowerOcean system

These credentials can be obtained through the EcoFlow Developer Console after registering your application.

Usage areas

Grid meter
Solar production
Battery

Parameters

Name	Description	Level
`accesskey`	Access Key Access Key from EcoFlow Developer Console	optional
`secretkey`	Secret Key Secret Key from EcoFlow Developer Console	optional
`serial`	Serial	optional
`capacity` [kWh]	Battery capacity Example: `50`	optional
`minsoc` [%]	Minimum charge Lower limit when discharging the battery in normal operation Example: `25`	optional
`maxsoc` [%]	Maximum charge Upper limit when charging the battery from the grid Example: `95`	optional
`region`	API Region If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. Default: `auto`	advanced
`cache`	Cache Time interval for data refresh Default: `30s` Example: `5m`	advanced
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.	advanced
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

Grid meter Solar production Battery

meters:
    - name: my_grid
      type: template
      template: ecoflow-powerocean
      usage: grid
      accesskey: # Access Key, Access Key from EcoFlow Developer Console
      secretkey: # Secret Key, Secret Key from EcoFlow Developer Console
      serial: # Serial
      region: auto # API Region, If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. [auto, europe, america] (optional)
      cache: 30s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: ecoflow-powerocean
      usage: pv
      accesskey: # Access Key, Access Key from EcoFlow Developer Console
      secretkey: # Secret Key, Secret Key from EcoFlow Developer Console
      serial: # Serial
      region: auto # API Region, If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. [auto, europe, america] (optional)
      cache: 30s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: ecoflow-powerocean
      usage: battery
      accesskey: # Access Key, Access Key from EcoFlow Developer Console
      secretkey: # Secret Key, Secret Key from EcoFlow Developer Console
      serial: # Serial
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 25 # Minimum charge (%), Lower limit when discharging the battery in normal operation (optional)
      maxsoc: 95 # Maximum charge (%), Upper limit when charging the battery from the grid (optional)
      region: auto # API Region, If you sometimes see error code 8513, like for example Starlink users do, automatic region detection fails. Here, you can set the API region manually. Possible values: auto (default), europe, or america. [auto, europe, america] (optional)
      cache: 30s # Cache, Time interval for data refresh (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)