Mennekes AMTRON 4You 300

← Chargers Sponsor token required

The wallbox must be configured as satellite/slave using the DIP switches on the mainboard and Modbus RTU must be enabled (bank S1: 4=ON, 5=ON, 7=OFF). No external meter should be connected directly to the wallbox, as all functions are controlled directly by evcc. For Kostal systems with Smart Energy Meter (KSEM), the additional activation code (Solar Pure Mode / Solar Plus Mode) for the KSEM is not required.

Supported features

mA regulation: Finer charging current regulation (mA instead of A) for better solar surplus use.
1P/3P: Automatic phase switching. Useful for solar surplus charging.
Built-in meter: Support for an integrated meter. Availability may vary between models.

Parameters

Modbus

Name	Description	Value	Level
`id`	Modbus ID Default: `1`	int	required
`device`	Device name USB-RS485 adapter Example: `/dev/ttyUSB0`		required
`baudrate`	Baudrate Default: `9600`		required
`comset`	ComSet Communication parameter for the adapter Default: `8N1`		required
`host`	IP address or hostname Example: `192.0.2.2`		required
`port`	Port Default: `502`	int	required

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: mennekes-compact

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 50
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 57600 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8N2" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 50
      host:  # Hostname
      port: 502 # Port