KEBA KeContact P20

← Chargers Sponsor token required

Requires firmware version 3.10.42 (C-series) bzw. 1.11 (X-series). For phase switching the Keba phase switch (KeContact S10) is also required and the switching control via Modbus must be set in the wallbox settings. For the X-series in the web menu, for the C-series via Modbus by setting the value "3" in register 5050.

Supported features

mA regulation: Finer charging current regulation (mA instead of A) for better solar surplus use.
RFID: Integrated RFID card reader for vehicle identification.
1P/3P: Automatic phase switching. Useful for solar surplus charging.

Parameters

Name	Description	Value	Level
`id`	Modbus ID Default: `1`	int	required
`host`	IP address or hostname Example: `192.0.2.2`		required
`port`	Port Default: `502`	int	required
`welcomecharge`	Charge on connection Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting.		advanced

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: keba-modbus

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      welcomecharge: # Charge on connection, Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting. (optional)