E3/DC Easy Connect

← Chargers Sponsor token required

DIP switch 10 at the controller needs to be set to 'ON'. A recent controller firmware is recommended.

Supported features

• mA regulation: Finer charging current regulation (mA instead of A) for better solar surplus use.
• RFID: Integrated RFID card reader for vehicle identification.

Parameters

Name	Description	Value	Level
id	Modbus ID Default: 1	int	required
host	IP address or hostname Example: 192.0.2.2		required
port	Port Default: 502	int	required

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: phoenix-ev-eth

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port