Amperfied Wallbox Energy Control

← Chargers Sponsor token required

Please read the wiring and configuration manual carefully. All boxes must be configured for external control in follower mode (DIP S5/4 OFF). Each box needs an individual Modbus ID (DIP S4). Ensure correct RS485 cabling including bus termination (DIP S6/2).

Supported features

mA regulation: Finer charging current regulation (mA instead of A) for better solar surplus use.
Built-in meter: Support for an integrated meter. Availability may vary between models.

Parameters

Modbus

Name	Description	Value	Level
`id`	Modbus ID Default: `1`	int	required
`device`	Device name USB-RS485 adapter Example: `/dev/ttyUSB0`		required
`baudrate`	Baudrate Default: `9600`		required
`comset`	ComSet Communication parameter for the adapter Default: `8N1`		required
`host`	IP address or hostname Example: `192.0.2.2`		required
`port`	Port Default: `502`	int	required

Configuration example for evcc.yaml

If you don't want to configure via the UI, you can alternatively use this YAML block.

chargers:
    - name: my_charger
      type: template
      template: heidelberg

      # RS485 via adapter (Modbus RTU)
      modbus: rs485serial
      id: 1
      device: /dev/ttyUSB0 # USB-RS485 Adapter Adresse
      baudrate: 19200 # Prüfe die Geräteeinstellungen, typische Werte sind 9600, 19200, 38400, 57600, 115200
      comset: "8E1" # Kommunikationsparameter für den Adapter

      # RS485 via TCP/IP (Modbus RTU)
      modbus: rs485tcpip
      id: 1
      host:  # Hostname
      port: 502 # Port